six receivers ???

Software-Installation, Red Pitaya, SDR-Software, Modifikationen
SWL Uwe
Beiträge: 32
Registriert: 18 Apr 2016, 18:05

six receivers ???

Beitragvon SWL Uwe » 29 Jun 2016, 09:03

SDR receiver compatible with HPSDR 0.94-1267

SDR receiver emulating a HPSDR receiver with one network interface module and six receivers. (by Pavel Demin)

Ist es damit möglich, einen websdr zu stellen?
Config?
Im Websdr sieht es so aus.
Was muss man nun eintagen, damit es geht?
Einige beispiele siehe unten, Versucht hab ich schon einiges, komme aber nicht weiter
device ist ja nun die ip, bekomme die fehlermeldung
--------------------------------------------------------
>>> WebSDR server (20140718.1716-32)<<<

Copyright 2007-2014, Pieter-Tjerk de Boer, pa3fwm@websdr.org

, Can't set audio data format to 16 bit little-endian.
, Can't select 2 input channels.
, Can't set fragmentsize.
, Can't set input sample rate to 192000.
, Can't open 192.168.178.47 for read - quitting - Bad file descriptor
root@funk-OptiPlex-760:/home/sdr/dist11#

--------------------------------------------------------
#######################################################################
# We need to configure at least one band:
# First give it a short name, e.g. "40m":
######
#1. receiver configuration
#band fifi 160 m
# Interne soundkarte
#device $hw:0,0,0
#samplerate 192000
#hpf 8000
#audioformat 2
#swapiq
#waterfallformat 9
#fftplaneffort 0
#centerfreq 1900LSB
#gain 40
#noiseblanker 980
#antenna Delta Loop 168 M
######
#1. receiver configuration
band fifi 80 m
# FIFI SDR Soundkarte
device $hw:1,0
samplerate 192000
hpf 8000
audioformat 2
swapiq
waterfallformat 9
fftplaneffort 0
centerfreq 3705.04
initial 3755LSB
gain 10
noiseblanker 980
antenna Delta Loop 168 M
######
#2. receiver configuration
band fifi 40 m
FIFI SDR Soundkarte
device $hw:2,0
samplerate 192000
hpf 8000
audioformat 2
swapiq
waterfallformat 9
fftplaneffort 0
centerfreq 7105.2
#initial 3755LSB
gain 10
noiseblanker 980
antenna Delta Loop 168 M

############################
#3. receiver configuration
band 11 m
#DVBT Stick device
device !rtlsdr 127.0.0.1:5555 30
samplerate 2048000
hpf 8000
audioformat 2
swapiq
waterfallformat 9
fftplaneffort 0
centerfreq 27060USB
gain -28
noiseblanker 980
antenna Delta Loop 168 M
############################
#3. receiver configuration
band 10 m
# DVBT Stick device
device !rtlsdr 127.0.0.1:3333 30
samplerate 2048000
hpf 8000
audioformat 2
swapiq
waterfallformat 9
fftplaneffort 0
centerfreq 28980USB
gain 0
noiseblanker 980
antenna Delta Loop 168 M

############################
#4. receiver configuration
band 2 m
#DVBT Stick device
device !rtlsdr 127.0.0.1:1111 21
samplerate 2048000
hpf 8000
audioformat 2
swapiq
waterfallformat 9
fftplaneffort 0
centerfreq 145000
gain 0
noiseblanker 980
antenna Delta Loop 168 M

############################
#4. receiver configuration
band 70 cm
# DVBT Stick device
device !rtlsdr 127.0.0.1:2222 66
samplerate 2048000
hpf 8000
audioformat 2
swapiq
waterfallformat 9
fftplaneffort 0
centerfreq 438710
gain -16
noiseblanker 980
antenna Delta Loop 168 M
pavel
Beiträge: 71
Registriert: 05 Mär 2016, 10:52

Re: six receivers ???

Beitragvon pavel » 29 Jun 2016, 17:45

I've developed this six-band receiver mainly to be used with CW Skimmer Server.

I don't know what protocols are supported by WebSDR. According to http://websdr.org/faq.html, it doesn't support SDR receivers connected via Ethernet.

I've just found that somebody tries to interface OpenWebRX with the HPSDR protocol:
http://blog.sdr.hu/2016/06/23/hpsdrtool.html

If you're interested, I have another six-band receiver that would be much easier to interface with OpenWebRX:
https://github.com/pavel-demin/red-pita ... eiver_mult

Zurück zu „Software“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast